centrifugal spray nozzles

Atomization disk surface is made by special electrostatic material, as the fine mist droplets (50~200microns) exit the sprayers nozzle with a positive electrostatic charge, they are like tiny magnets that are very much attracted to negative leaf and insect. But the droplets are not attracted to themselves, it fact they repeal each other because they are of the same charge.

Try to hold two magnet ends together. Positive + to positive + or negative – to negative – they repeal and move away from each other. Turn one magnet around so that they are now positive + to negative – . They are now strongly attracted to each other and form a tight bond. Thus the theory of electrostatic spraying. As magnets stick to most metals so do electrostatic charged droplets stick to most grounded objects.

This repelling force means the droplets will not collide with each other thus a prefect uniform pattern is sprayed on the surface with no over spray, runs or blobs. Unlike conventional spraying where droplets hit each other again and again to form a blob / blobs, runs and over spray.

Now that flying droplets have a positive magnetic charge which is 75 times stronger than Gravity are forced to find a surface to land on that has no other droplets on it.

Therefore they will travel all the way around, behind, under, over, or inside the target object being sprayed that is negative or ground (ed). Thus complete 3D surface coverage of the target object.

Electrostatic nozzles can and will reduce cost of product, cost of labour in application time with superior coverage. Safer with no spray drift, less exposure to worker and environment . Not possible any other way. No other product or method can do this.

electrostatic centrifugal spray nozzles specification:
Spray width: 1.5m
Mist droplet: 50~200μm
Power supply: 6S battery
Weight: 106g
Power: 50W

Copyright © 2016-2021 Shandong Joyance Intelligence Technology Co., Ltd. All Rights Reserved. Email: sales@joyancedrone.com